by Marketing 22. December 2014 08:40

One (1) used APV Sterling Extruder. Electrically-heated, water-cooled barrel with circulation system, jacketed feed section, 68" center line height; 6 inches, 32:1 L/D; 400 HP DC motor with SCR controller; 17.5:1 gear box ratio; 100 RPM screw speed; control panel designed for 6 barrels, 3 screen changers, 2 adaptors, 1 melt pump and 7 die zones. Serial #60455.


Type: Extruders » Single Screw
Quantity: 1
IN: 6
Manufacturer: APV
Item #: 34203


Get Quote Now >>

 

by Marketing 19. December 2014 20:10

One (1) used Metaplast Vacuum Tank, Model MVS-SP. With stainless steel construction, 14" x 14" x 20' long tank; vacuum pump, circulation pump, heat exchanger and resevoir, 575 volts. Serial #792026.


Type: Extrusion Downstream » Vacuum Tank / Table
Quantity: 1
Size: 240
Manufacturer: METAPLAST
Item #: 41355


Get Quote Now >>

 

by Marketing 17. December 2014 20:25

One (1) used Cumberland Granulator, Model 50H. With 20" x 50" feed opening, 18-blade solid helical rotor, with feed hopper; 200 HP, 440 volt, 1185 rpm motor; and 48" wide x 23' long x 10' discharge height belt conveyor. Cumberland Serial #551000-87003.


Type: Granulator/Plastic » All Granulator/Plastic
Quantity: 1
HP: 200
Manufacturer: CUMBERLAND
Item #: 41246


Get Quote Now >>

 

by Marketing 16. December 2014 21:45

One (1) used Pharmatech De-Duster Metal Detector Combination Unit, Model Combi-500CE. With stainless steel product contact surfaces, Pharmatech tower tablet de-duster with CEIA metal check with reject; mounted on unitized base. Serial #0806469S, new in 2008.


Type: Tablet Presses » Tablet De-Dusters
Quantity: 1
Size: 0
Manufacturer: PHARMATECH
Item #: 41487


Get Quote Now >>

 

by Marketing 15. December 2014 18:30

One (1) used Berringer Hydraulic Slide Plate Screen Changer, Model 26. With dual breaker plates, 8 inches, and 3 HP hydraulic power pack.


Type: Extrusion Downstream » Screen Changer
Quantity: 1
Inches: 8
Manufacturer: BERRINGER
Item #: 36617


Get Quote Now >>

 

by Marketing 11. December 2014 08:35

One (1) used Douglas Machine Bottom-Load Horizontal Cartoner, Model Continuous Motion. Can perform at up to 83 packs per minute, with Nordson ProBlue 7 Hot-Melt Glue System; with dual-lane infeed with starwheels to lay product down; includes Allen Bradley Logix 5561 PLC and Allen Bradley Kinetix 6000 Servo Controllers; 6.5 CFM @ 80 PSI, 3/60/480 volts; was last running a 12-pack carton of an 8 oz. nutritional drink at 83 packs per minute. Serial #M206017, built in 2007.


Type: Packaging » Cartoners
Quantity: 1
Size: 0
Manufacturer: DOUGLAS MACHINE
Item #: 37709


Get Quote Now >>

 

by Marketing 10. December 2014 19:20

One (1) used American Process Ribbon Blender, Model DRB-120. With 120 cu ft working capacity, stainless steel construction, approximately 44" wide x 120" long x 52" deep trough, double ribbon, outboard roller bearings, chain & sprocket-driven with 50 HP motor drive, 10" diameter center bottom outlet on legs. Serial #1958.


Type: Mixers » Ribbon / Paddle
Quantity: 1
Cu Ft: 120
Manufacturer: AMERICAN PROCESS
Item #: 40215


Get Quote Now >>

 

by Marketing 9. December 2014 21:15

One (1) used Farrel Banbury Internal Rotor Lab Mixer, Model BR. With two (2) wing rotors, 96 cubic inch (1.57 Liter) chamber, approx. 2.6 pound batch; with 440 volt, 3-phase 4-speed motor 25/17/12.5/8.3 HP at 1750/1160/870/575 RPM; Serial #60A1072.


Type: Mixers » Internal Rotor/Continuous Mixer
Quantity: 1
Liters: 1.57
Manufacturer: FARREL BANBURY
Item #: 42849


Get Quote Now >>

 

by Marketing 8. December 2014 19:45

One (1) used IWKA Rotary Tube Filler, Model TFS 30M&H. Rated at speeds up to 200 tubes/minute, designed for both metal and plastic tubes; 20-station rotary fill table, coding station, nitrogen blanket system, vacuum pump, triple fold station with IWKA TZ-101 tube feeder system; feeder Serial #20811, filler Serial #31/36231.


Type: Packaging » Tube Filler
Quantity: 1
Size: 0
Manufacturer: IWKA
Item #: 39736


Get Quote Now >>

 

by Marketing 5. December 2014 20:10

One (1) used Thomas Engineering Compulab Coating Pan, Model CPL-36. With stainless steel construction, integrally mounted controls with 36" and 24" perforated pans with lift; 3 phase, steam heated, spray guns, 460 volts. Serial #175, new in 2000.


Type: Coating Pans
Quantity: 1
Size: 36"
Manufacturer: THOMAS ENGINEERING
Item #: 39877


Get Quote Now >>

 

About Federal Equipment

For more than 50 years, Federal Equipment Company has been a trusted name in the processing equipment industry. As one of the world’s top suppliers of pharmaceutical pilot and production machinery, Federal Equipment is dedicated to providing the best in quality used equipment and related asset disposition services to our clients. Our expansive and deep pharmaceutical related buying and selling experience, purchasing power, and global marketing reach, produce exceptional results for our clients, whether they are buying, selling, or both.

Categories